Write the complete APT part program to profile mill the outside edges of the part in Figure P6.7….

Write the complete APT part program to profile mill the outside edges of the part in Figure P6.7. The part is 15 mm thick. Tooling a 30-mm diameter end mill with four teeth, cut-ting speed = 150 mm/min. and feed = 0.085 mm/tooth. Use the lower left corner of the part as the origin in the x-y axis system. Two of the holes in the part have already been (hired and will be used for clamping the part during profile milling. Postprocessor call statement is MACHIN/MILL. 06.